- Info Perusahaan
- Kontak Perusahaan
- Penjelasan Ringkas
- Ingin menghubungi perusahaan ini?
- Kirim PesanPermintaan Anda akan disimpan di "Surat Bisnis".
- Masukan ke Perusahaan Rekanan
Tanggal Bergabung: 25 Jun. 2024 - Terakhir Diperbarui: 18 Dec. 2015
Sifat Dasar Usaha : Pabrikan, Dagang, Jasa dari kategori Kebutuhan Industri
PRODUCT LIST :
SOIL EQUIPMENT ( Lab. Uji Mekanika Tanah/ Mektan) :
- HAND BOR, SO-110A
- STANDARD PENETRATION TEST ( SO-130A) , Astm D-1586/ Aashto T-206
- SAMPLE EXTRUDER ( SO-140)
- SAMPLE EXTRUDER Electric ( SO-145)
- DYNAMIC CONE PENETROMETER/ DCP ( SO-150)
- TUBE DENSITY SAMPLER, Astm D-2573 ( SO-160)
- CORPS OF ENGINEER SOIL SURFACE SAMPLER Astm D-2937, ( SO-170)
- DYNAMIC CONE PENETROMETER/ DCP ( SO-150LR)
- DUTCH CONE PENETROMETER/ Sondir 2.5 Ton ( SO-200) Astm D-3441
- DUTCH CONE PENETROMETER/ Sondir 5 Ton ( SO-210) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton ( SO-200HD) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton ( SO-210HD) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hydraulic 10 Ton ( SO-700HD) , Astm D-3441
- PLATE BEARING TEST SET ( SO-250) Astm D-1194/ Aashto T-235
- FIELD CBR TEST SET ( SO-260) Astm D-4429
- PROVING RING PENETROMETER ( SO-270)
- TVA PENETROMETER ( SO-280)
- ATTERBERGH LIMIT ( SO-310, SO-315, SO-320)
- LIQUID LIMIT TEST SET ( SO-310) Astm D-4318/ Aashto T-89
- LIQUID LIMIT DEVICE Hand Operated ( SO-311A) , Astm D-4318/ Aashto T-89.
- LIQUID LIMIT DEVICE ELECTRIC ( SO-311B) , Astm D-4318/ Aashto T-89
- PLASTIC LIMIT TEST SET ( SO-315) , Astm D-4318/ Aashto T-90
- SHRINKAGE LIMIT TEST SET ( SO-320) , Astm D-427/ Aashto T-92
- HYDROMETER ANALYSIS TEST SET ( SO-330A) , Astm D-422/ Aashto T-88
- MECHANICAL END OVER END SHAKER ( SO-338) , BS-1377
- VACUUM STAND With 6 Flask Capacity ( SO-339A)
- SPECIFIC GRAVITY Heating Method ( SO-340)
- SPECIFIC GRAVITY Vacuum Method ( SO-340A) , Astm D-854/ Aashto T-100
- SPECIFIC GRAVITY Vacuum Method ( SO-340B) , Astm D-854/ Aashto T-100
- COMPACTION TEST SET ( SO-350) , Astm D-698/ D-1557/ T-99/ T-180
- LABORATORY CBR TEST SET Electric ( SO-360A) , Astm D-1883/ Aashto T-193
- LABORATORY CBR TEST SET, Astm D-1883/ Aashto T-193
- COMBINATION PERMEAMETER ( SO-370) , Astm D-2434/ AASHTO T-215
- COMPACTION PERMEAMETER TEST SET ( SO-390A) , 1/ 30 cu.ft
- COMPACTION PERMEAMETER TEST SET ( SO-395A) , 1/ 13.33 cu.ft
- SAND CONE TEST SET ( SO-400) , Astm D-1556/ Aashto T-191
- SPEEDY MOISTURE TESTER ( SO-430) , Aashto T-217
- MOISTURE CONTENT TEST SET ( SO-450)
- SPEEDY MOISTURE TESTER ( SO-430D) , Aashto T-217
- UNCONFINED COMPRESSION MACHINE ( SO-500) , Astm D-2166/ Aashto T-208
- UNCONFINED COMPRESSION MACHINE ELECTRIC ( SO-500A) , Astm D-2166/ Aashto T-208- CONSOLIDATION TEST SET ( SO-515) , Astm D-2435/ Aashto T-216
- DIRECT SHEAR TEST SET ( SO-525) , Astm D-3080/ Aashto T-236
- ELECTRIC DIRECT SHEAR TEST SET
- TRIAXIAL TEST SET ( SO-600) CU, UU, CD test methode, Astm D-2850, Digital reading for PP value
- TRIAXIAL TEST SET ( SO-550) CU, UU, CD test methode Astm D-2850, Mercury manometer reading for PP value
AGGREGATE EQUIPMENT ( Lab. Uji Bahan/ Mektan) :
- SAMPLE SPLITER AG-100, 1/ 2 inch, 12 holes, 1/ 2 inch chute width
- SAMPLE SPLITER AG-101, 3/ 4 inch, 12 holes, 3/ 4 inch chute width
- SAMPLE SPLITER 1 inch, 12 holes, 1 inch chute width ( AG-102)
- SAMPLE SPLITER 1-1/ 2 inch, 12 holes, 1-1/ 2 inch chute width ( AG-103)
- SAMPLE SPLITER 2 inch, 12 holes, 2 inch chute width ( AG-104)
- SAMPLE SPLITER 2 1/ 2 inch, 12 holes, 2 1/ 2 inch chute width ( AG-105)
- SAMPLE SPLITER 3 " inch, 12 holes, 3 inch chute width ( AG-106)
- GILSON SAMPLE SPLITTER Varieble chute width, 1/ 2 " increment ( AG-111)
- PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 32 holes ( AG-122)
- PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 16 holes ( AG-123)
- STANDAR SIEVE, Brass Round Sieve 8 " ( 200 cm) diameter
- LENGTH GAUGE ( AG-170) , BS-812
- THICKNESS GAUGE ( AG-180) , BS-812
- STANDAR SIEVE Brass Round Sieve 12 " ( 200 cm) diameter - Gradation test & Distribution test
- SIEVE 4 " ; mesh 101.6 mm opening, 8 " dia ( AG-200A)
- SIEVE 3 1/ 2 " ; mesh 88.9 mm opening, 8 inch dia ( AG-201A)
- SIEVE 3 " ; mesh 76.2 mm opening, 8 " dia ( AG-202A)
- SIEVE 2 1/ 2 " ; mesh 62.5 mm opening, 8 inch dia ( AG-203A)
- SIEVE 2 " ; mesh 50.8 mm opening, 8 " dia ( AG-204A)
- SIEVE 1 3/ 4 " ; mesh 44.4 mm opening, 8 inch dia ( AG-205A)
- SIEVE 1 1/ 2 " ; mesh 38.1 mm opening, 8 " dia ( AG-206A)
- SIEVE 1 1/ 4 " ; mesh 31.7 mm opening, 8 inch dia ( AG-207A)
- SIEVE 1 " ; mesh 25.4 mm opening, 8 " dia ( AG-208A)
- SIEVE 7/ 8 " ; mesh 22.2 mm opening, 8 inch dia ( AG-209A)
- SIEVE 3/ 4 " ; mesh 19.0 mm opening, 8 " dia ( AG-210A)
- SIEVE 5/ 8 " ; mesh 15.8 mm opening, 8 inch dia ( AG-211A)
- SIEVE 1/ 2 " ; mesh 12.7 mm opening, 8 " dia ( AG-212A)
- SIEVE 7/ 16 " ; mesh 11.1 mm opening, 8 inch dia ( AG-213A)
- SIEVE 3/ 8 " ; mesh 9.5 mm opening, 8 " dia ( AG-214A)
- SIEVE 5/ 16 " ; mesh 7.9 mm opening, 8 inch dia ( AG-215A)
- SIEVE 1/ 4 " ; mesh 6.3 mm opening, 8 " dia ( AG-216A)
- SIEVE # 4; mesh 4.75 mm opening, 8 inch dia ( AG-218A)
- SIEVE # 8; mesh 2.36 mm opening, 8 " dia ( AG-222A)
- SIEVE # 10; mesh 2.00 mm opening, 8 inch dia ( AG-223A)
- SIEVE # 12; mesh 1.70 mm opening, 8 " dia ( AG-224A)
- SIEVE # 16; mesh 1.18 mm opening, 8 inch dia ( AG-226A)
- SIEVE # 20; mesh 0.850 mm opening, 8 " dia ( AG-228A)
- SIEVE # 30; mesh 0.600 mm opening, 8 inch dia ( AG-230A)
- SIEVE # 40; mesh 0.425 mm opening, 8 " dia ( AG-232A)
- SIEVE # 50; mesh 0.300 mm opening, 8 inch dia ( AG-234A)
- SIEVE # 60; mesh 0.250 mm opening, 8 " dia ( AG-235A)
- SIEVE # 70; mesh 0.212 mm opening, 8 inch dia ( AG-236A)
- SIEVE # 80; mesh 0.180 mm opening, 8 " dia ( AG-237A)
- SIEVE # 100; mesh 0.150 mm opening, 8 inch dia ( AG-238A)
- SIEVE # 120; mesh 0.125 mm opening, 8 " dia ( AG-240A)
- SIEVE # 140; mesh 0.106 mm opening, 8 inch dia ( AG-240A)
- SIEVE # 170; mesh 0.090 mm opening, 8 " dia ( AG-242A)
- SIEVE # 200; mesh 0.075 mm opening, 8 inch dia ( AG-242A)
- PAN & COVER; receiver with lid, 8 inch dia ( AG-250)
- STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch diameter Sieve Analysis, Gradation Test, AG 300A up to AG 350
- SIEVE SHAKER ( AG-510) , Hand Operated
- SIEVE SHAKER Electric ( AG-515)
- ELECTRIC SIEVE SHAKER With Timer ( AG-515T)
- WOODEN STANDAR SIEVE Stainless Steel Round Sieve 8 inch dia)
- WOODEN SIEVE 1/ 4 Inch up to 4 Inch ( mesh 6.3 mm up to mesh 101.6 mm opening)
- WOODEN SIEVE # 4; Mesh 4.75 mm opening
- WET WASHING SIEVE # 200, 8 " dia., 4 " depth ( AG-492)
- WET WASHING SIEVE # 200, 8 " dia., 8 " depth ( AG-493)
- SAND EQUIVALENT TEST SET ( AG-600) Astm D-2419
- SAND EQUIVALENT SHAKER ( AG-610) Astm D-2419/ Aashto T-176
- BOTTLE ROLLER BS-812/ Astm C-117 ( AG-621)
- LOS ANGELES ABRASION MACHINE, Astm C-131/ AASHTO T-96 ( AG-700)
- AGGREGATE IMPACT TEST, BS-812 ( AG-750)
- AGGREGATE CRUSHING VALUE APPARATUS, BS-812 ( AG-760)
- AGGREGATE CRUSHING VALUE APPARATUS ( AG-760A)
- UNCOMPACTED VOID CONTENT APPARATUS
- BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 ( AG-800)
- ABSORPTION OF FINE AGGREGATE TEST SET, Astm C-128/ Aashto T-84 ( AG-810A)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, Astm C-127/ AASHTO T-85 ( AG-825)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, Astm C-127/ AASHTO T-85 ( AG-825)
- ORGANIC IMPURITIES TEST SET, Astm C-40/ AASHTO T-21 ( AG-910)
- SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 ( AG-920)
- GEOLISTRIK / RESISTIVITY METER ( Mebatek22S)
CONCRETE TESTING EQUIPMENT ( Lab. Beton/ Uji Bahan struktur) :
- COMPRESSION MACHINE 1500 kN ( CO-321.3) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 2000 kN ( CO-321.4) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 3000 kN ( CO-321.5) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 1500 kN ( CO-325.3SA) , Test Beton Electric Hydraulic Pump ASTM C-39
- COMPRESSION MACHINE 2000 kN ( CO-325.4SA) , Test Beton Electric Hydraulic Pump Astm C-39
- COMPRESSION MACHINE 3000 kN ( CO-325.5SA) , Test Beton Electric Hydraulic Pump Astm C-39
- HYDRAULIC CONCRETE BEAM TESTING MACHINE ( CO-330) , Astm C-78
- MECHANICAL CONCRETE BEAM TESTING MACHINE ( CO-351) , Astm C-78
- CONCRETE CYLINDER MOLD ( CO-300) , Silinder Beton 10 cm dia x 20 cm height
- CONCRETE CYLINDER MOLD ( CO-301) , Silinder Beton 15 cm dia x 30 cm height
- CONCRETE CUBE MOLD ( CO-311) , Kubus Beton 10 x 10 x 10 cm
- CONCRETE CUBE MOLD ( CO-312) , Kubus Beton 15 x 15 x 15 cm
- CONCRETE BEAM MOLD ( CO-317A) , 15x15x60 cm Uji lentur beton
- CONCRETE BEAM MOLD ( CO-319A) , 20x20x80 cm Uji lentur beton
- CONCRETE CRUSHING MACHINE 1500 kN ( CO-325.3SA)
- CONCRETE CRUSHING MACHINE 2000 kN ( CO-325.4SA)
- HAMMER TEST ORIGINAL
- HAMMER TEST DIGITAL
- COMPACTING FACTOR APPARATUS ( CO-355) , BS-1881
- SLUMP TEST SET ( CO-370) , Astm C-143/ Aashto T-119
- CONCRETE COMPRESSION MACHINE 1500 kN ( CO-325.3DA) , Test Beton Electric Hydraulic Pump ASTM C-39
- CONCRETE COMPRESSION MACHINE 2000 kN ( CO-325.4DA) , Test Beton Electric Hydraulic Pump Astm C-39
- CONCRETE COMPRESSION MACHINE 3000 kN ( CO-325.5DA) , Test Beton Electric Hydraulic Pump Astm C-39
- VEBE TIME ( CO-380) , BS-1881
- AIR CONTENT OF FRESH MIXED CONCRETE ( CO-400) , Astm C-231/ Aashto T-152
- VIBRATING TABLE ( CO-410)
- VERTICAL CYLINDER CAPPING SET ( CO-470) , Astm C-617
- MODULUS OF ELASTICITY IN CONCRETE TEST SET ( CO-500)
- SPLIT TENSILE TEST CO-525, BS-1881
- CONCRETE TEST HAMMER Astm C-805 Proceq/ Original Schmidt ® , Matest, Tecnotest, Elcometer.
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE TEST HAMMER Type N ( CO-550.1S)
- CONCRETE TEST HAMMER Type L ( CO-550.2S)
- CONCRETE TEST HAMMER Type NR ( CO-550.3S)
- CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.3S)
- DIGITAL CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.5S)
- SILVER SCHMIDT Type Pcn, UN, BN/ Proceq Concrete Test Hammer
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE CRACK DETECTION ( CO-325UI) â Ultrasonic Instrumentâ Concrete determination for Cavities, crack, defects due to fire and frost
- REBARS LOCATOR ( CO-570S)
- PROFOSCOPE Rebars Detectors, Rebar detection, Measurement of Concrete cover
- PULL OFF TESTER 6 or 16 kN with digital manometer ( CO-550.8S)
- PULL-OFF TESTER 6 or 16 kN with Electronic Display Device
- BUILDING MOISTURE METERS ( CO-5360BLD)
- CONCRETE/ ASPHALT CUTTER ( CO-400DCC)
- CONCRETE VIBRATOR ( CO-20EY)
- LABORATORY CONCRETE MIXER ( CO-610)
- AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE ( CE-100) , Astm C-204/ Aashto T-153
- SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST ( CE-110) , Astm C-188/ Aashto T-133
- TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE ( CE-120) , Astm C-187/ C-191/ T-129/ T-131
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR ( CE-160) , Astm C-109/ Aashto T-106
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, ASTM C-109/ AASHTO T-106 ( CE-160A)
- COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-170)
- COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-175)
- DIGITAL COMPRESSION MACHINE 2000 kN ( CO-325.4DSA)
- DIGITAL COMPRESSION MACHINE 3000 kN ( CO-325.5DSA)
ASPHALT EQUIPMENT ( Lab. Uji Aspal/ Jalan Raya & Transportasi) :
- SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS ( BI-100) , Astm D-70/ Aashto T-228
- DISTILATION OF CUTBACK ASPHALTS ( BI-110) , Astm D-402/ Aashto T-78
- WATER CONTENT IN PETROLEUM PRODUCTS ( BI-120) , Astm D-95/ Aashto T-55
- SAYBOLT VISCOSIMETER ( BI-150A) , Astm D-402/ Aashto T-78
- ASTM THERMOMETER 17 C, 19 to 27 deg.C ( GE-644.1)
- ASTM THERMOMETER 18 C, 34 to 42 deg.C ( GE-644.2)
- ASTM THERMOMETER 19 C, 49 to 57 deg.C ( GE-644.3)
- ASTM THERMOMETER 20 C, 57 to 65 deg.C ( GE-644.4)
- ASTM THERMOMETER 21 C, 79 to 87 deg.C ( GE-644.5)
- ASTM THERMOMETER 22 C, 95 to 103 deg.C ( GE-644.6)
- DIGITAL ASPHALT THERMOMETER ( GE-914TM)
- INFRARED THERMOMETERGE ( 380ST)
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200) , Astm D-92/ Aashto T-48
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200 A) , Astm D-92/ Aashto T-48
- SOFTENING POINT TEST SET ( BI-210) , Astm D-36/ Aashto T-53
- LOSS ON HEATING/ THIN-FILM TEST ( BI-220) , Astm D-6/ D-1754, Aashto T-47/ T-179
- LABORATORY PENETRATION TEST SET ( BI-230) , Astm D-5/ Aashto T-49
- LABORATORY PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- AUTOMATIC BITUMINOUS COMPACTOR ( BI-325AAC) , Astm D-5581, BS 598-107, EN 12697-30
- DUCTILITY OF BITUMINOUS MATERIALS TEST SET ( BI-250) , Astm D-113/ Aashto T-51
- PARTICLE CHARGE METER ( BI-260)
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300) , Astm D-2172/ Aashto T-164
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300A) , Astm D-2172/ Aashto T-164
- REFLUX EXTRACTOR TEST SET ( BI-310) , ASTM D-2172/ AASHTO T-164
- BITUMINOUS PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- PORTABLE CORE DRILLING MACHINE ( ZIZ-CF102)
- MARSHALL TEST SET ( BI-320) , Astm D-1559/ Aashto T-245
- AUTOMATIC ASPHALT COMPACTOR ( BI-325AAC) , Astm D-5581, BS 598-107, EN 12697-30
- PERCENTAGE REFUSAL DENSITY BI-325PRD, BS 598-104; EN 12697-32
- CORE DRILLING TEST SET ( BI-400)
- DIAMOND BIT ( BI-406)
- DIAMOND CORE BIT ( BI-406.4H)
- CORE DRILLING TEST SET With Water Pump ( BI-400L)
- BENKLEMAN BEAM ( BI-450)
- MOT STRAIGHT EDGE ( BI-470)
- ASPHALT RECOVERY APPARATUS ( BI-480)
- ASPHALT/ CONCRETE CUTTER ( CO-400DCC)
MISCELLANEOUS :
- UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN Compression, Tensile, Bending and Shearing test
- TENSILE TESTING MACHINE, test of PVC materials ( MI-100)
- UNIVERSAL TESTING MACHINE 2000 kN, 1000 kN
- DIBBLE ( TUGAL) MI-120
- RAIN GAUGE ( MI-130)
- MORTAR MIXER, 5 â 10 Kg Capacity
GENERAL EQUIPMENT ( Alat Uji Penunjang Laboratorium) :
- PROVING RING 100 kg capacity ( GE-101.1) Calibration & certified
- PROVING RING 250 lbs capacity ( GE-101.2) Calibration & certified
- PROVING RING 500 lbs capacity ( GE-101.3) Calibration & certified
- PROVING RING 1000 lbs capacity ( GE-101.4) Calibration & certified
- PROVING RING 2.000 lbs capacity ( GE-101.5) Calibration & certified
- PROVING RING 6000 lbs capacity ( GE-101.6) + Kalibrasi
- PROVING RING 10.000 lbs capacity ( GE-101) + Kalibrasi
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 0.2 in. x 0.0001 in ( GE-130)
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 1.0 in x 0.01 in GE-131
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 10mm x 0.01mm GE-135
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 20mm x 0.01mm GE-136
- Dial Gauge Indicator ( Mitutoyo, Teclock) , 30mm x 0.01mm GE-137
- Dial Indicator ( Mitutoyo, Teclock) , 50 mm x 0.01 mm ( GE-138)
- Magnetic Dial Holder ( GE-140)
- DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity ( GE-161PC)
- CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity ( GE-150)
- Timbangan Ohaus - TRIPLE BEAM BALANCE ( Ohaus, ADAM)
- TRIPLE BEAM BALANCE 2610 gr x 0.1 sensitivity ( GE-152SW)
- Timbangan 2610 gr x 0.1 sensitivity ( GE-152LK)
- DIAL O-GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity ( GE-153)
- HEAVY DUTY SOLUTION BALANCE, 20 kg x 1 sensitivity ( GE-157DO)
- PLATFORM SCALE 50 kg x 10 gr sensitivity ( GE-159)
- HEAVY DUTY SOLUTION BALANCE ( GE-157LK) , 20 kg x 1 sens
- DIGITAL BALANCE ( OHAUS / AND) , 310 gr cap x 0.001 gr sensitivity GE-160
- DIGITAL BALANCE, 6100 gr x 0.1 gr sensitivity ( GE-161)
- OVEN ( Memmert) 14 litre, drying type ( GE-171)
- OVEN ( Memmert) 32 litre, drying type ( GE-172)
- OVEN ( Memmert) 39 litre, drying type ( GE-173)
- OVEN ( Memmert) 53 litre, drying type ( GE-174)
- OVEN ( Memmert) 108 litre, drying type ( GE-175)
- LABORATORY OVEN ( Memmert) 256 litre, drying type ( GE-176)
- LABORATORY OVEN ( Memmert) 416 litre, drying type ( GE-177)
- LABORATORY OVEN ( Memmert) 749 litre, drying type ( GE-178)
- HOT PLATE ( GE-191) , Single burner plate
- HOT PLATE ( GE-192) , Double burner plate
- GLASS PLATE ( GE-396) , 10 mm thick, 30 x 30 cm
- WATER BATH, COOLING SYSTEM
- BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
- GLASS CLAMP, ASBESTOS, WIRE GAUZE
- SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
- RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
- THIN BOX, ROUND PAN; SAMPLE CAN
- MIXING BOWL, 10cm - 20cm - 24cm diameter.
- GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
- ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
- SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
- FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
- DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
- DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter.
- FUNNEL, plastic or glass, wide or narrow mouth.
- BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
- EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia â 350 ml capacity; 17 cm dia., 500 ml capacity.
- MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
- WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
- PIPETTE, 5 ml - 10 ml capacity
- CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
- THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C. 0-360 deg.C.
- POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
- DIAL THERMOMETER, range 0 - 100; 0-200; 0-300 deg.C.
- ASTM THERMOMETER 12C, 20 to 102 deg.C/ Specific Gravity ( GE-641)
- ASTM THERMOMETER 63 C, 8 to 32 deg.C ( GE-642)
- ASTM THERMOMETER 13 C, 155 to 170 deg.C/ Loss on Heating ( GE-643)
- ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C/ Softening Point ( GE-646.1)
- ASTM THERMOMETER 16 C, 30 to 200 deg.C/ Softening Point ( GE-646.2)
- ASTM THERMOMETER 11 C, 6 to 400 deg.C/ Open Flash ( GE-648)
- ASTM THERMOMETER 7 C, 2 to 300 deg.C/ Distilation ( GE-649.1)
- ASTM THERMOMETER 8 C, 2 to 400 deg.C/ Distilation ( GE-649.2)
- DRYING OVEN 14 litre, drying type ( GE-171)
- DRYING OVEN 32 litre, drying type ( GE-172)
- DRYING OVEN 39 litre, drying type ( GE-173)
- DRYING OVEN 53 litre, drying type ( GE-174)
- DRYING OVEN 108 litre, drying type ( GE-175)
- DRYING OVEN 256 litre, drying type ( GE-176)
- DRYING OVEN 416 litre, drying type ( GE-177)
- DRYING OVEN 749 litre, drying type ( GE-178)
- MANOMETER 25 kg/ cm2 capacity, 6 " diameter ( GE-670)
- MANOMETER 60 kg/ cm2 capacity, 6 " diameter ( GE-671)
- MANOMETER 150 kg/ cm2 capacity, 6 " diameter ( GE-672)
- MANOMETER, 250 kg/ cm2 capacity, 6 " diameter ( GE-673)
- MANOMETER 300 kg/ cm2 capacity, 6 " diameter ( GE-674)
- MANOMETER 500 kg/ cm2 capacity, 6 " diameter ( GE-675)
- MANOMETER 700 kg/ cm2 capacity, 6 " diameter ( GE-676)
- MANOMETER 1000 kg/ cm2 capacity, 6 " diameter ( GE-677)
- VACUUM MANOMETER, 4 " dia. 0-76 cm HG ( GE-679)
- VACUUM PUMP, Rotary type, 1/ 2 HP ( GE-680)
- HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 Ton capacity.
- HYDRAULIC HAND PUMP, 10.000 psi, single action ( GE-690)
- HYDRAULIC HAND PUMP, 10.000 psi, double acting ( GE-691)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, single action ( GE-692)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting ( GE-695)
- HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi ( GE-697)
- STOP WATCH GE-700, 60 sec sweep x 30 min
- STOP WATCH GE-701, 30 sec sweep x 30 min
- VERNIER CALIPER 6 inch ( 150 mm) range measuring ( GE-710)
- VERNIER CALIPER 8 inch ( 200 mm) range measuring ( GE-711)
- VERNIER CALIPER1 10 inch ( 250 mm) range measuring ( GE-712)
- VERNIER CALIPER 12 inch ( 300 mm) range measuring ( GE-713)
- Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
- Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
- Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
- Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener' s Type Trowel, Chissel,
- Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.
MINING, COAL & PREPARATION EQUIPMENT ( Alat Lab Batubara, Nikel dan Pertambangan Umum)
- JAW CRUSHER 5 " x 8 " ( ME-100)
- JAW CRUSHER 2 3/ 8 " x 8 " ( ME-130)
- JAW CRUSHER 6.5 " x 8 " ( ME-110)
- LAB TYPE JAW CRUSHER ( ME-140)
- SINGLE ROLL CRUSHER 10 " ( ME-150)
- DOUBLE ROOL CRUSHER 10 " x 6 " ( ME-160)
- DOUBLE ROOL CRUSHER 20 " ( ME-165)
- LABORATORY MIXER CRUSHER ( ME-172)
- ROTARY SAMPLE DEVIDER 15 KG ( ME-170S1)
- ROTARY SAMPLE DEVIDER 30 KG ( ME-170S2)
- ROTARY SAMPLE DEVIDER 50 KG ( ME-170S3)
- ROTARY SAMPLE DEVIDER 120 KG ( ME-170S4)
- MIXER V ( ME-173)
- RO-TAP SIEVE SHAKER 8 " ( ME-180)
- RO-TAP SIEVE SHAKER 12 " ( ME-185)
- SHAKING TABLE / Table Consentrator / Meja Goyang ( ME-190)
- SAMPLE SPLITTER, Variable chute ( alumunium) width 1/ 2 inch ( 1/ 2â , 1â , 1 Â ½ â , 2â , etc)
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
- SAMPLE DEVIDER, Stainlles steel, chute width 1 " inch, 12 holes, with scoop & pan
- DISC PULVERIZER ( ME-210)
- BALL MILL ( ME-230BM)
- HAMMER MILL ( ME-240)
- GRINDING MILL ( ME-245)
- RAYMOND MILL ( ME-250)
- HARD GROVE GRINDABILITY ( ME-280)
- BIG DRYING SHED 180 x 120 x 550 cm ( ME-290)
- HOT PLATE ( ME-330)
- DRYING OVEN 120 X 110 X 220 cm ( ME-350)
- ROTARY OVEN ( Oven Rotary)
- CUTTING MESIN ( ME-400)
- THIN SECTION GRINDER
- LAB. PULVERIZER Pneumatic ( ME-200P)
- LAB. PULVERIZER Manual ( ME-200A)
- PORTABLE PULVERIZER ( ME-172)
- PELLET PRESS MACHINE ( ME-25PP)
- GRINDING MILL ( ME-245)
- V-MIXER ( ME-175)
- GRINDING HEAD SET C 1000
- GRINDING HEAD SET C 2000
- BIG DRYING SHED
- DUST COLLECTOR
- HOT PLATE
- OVEN ROTARY
Part & Accessories :
- JAW FACE 5 " X 8 "
- JAW FACE 5 " X 8 " ( Manganese)
- JAW FACE TYPE LAB
- GRINDING MILL C 500
- GRINDING MILL C 1000
- GRINDING MILL C 2000
- JIS SCOOP
Sifat Dasar Usaha : Pabrikan, Dagang, Jasa dari kategori Kebutuhan Industri
Kontak Perusahaan
| Nama: | Tn. A. Sofyan |
|---|---|
| E-mail: | Kirim Pesan |
| Nomor Ponsel: | |
| Nomor Telpon: | |
| Alamat: | Bandung, Jawa Barat Indonesia |
552418FBPenjelasan Ringkas
Sebuah perusahaan yang bergerak di bidang produksi dan pengadaan alat-alat Lab teknik sipil seperti: Soil, Concrete, Aggregate, Asphalt, Cement dan Mining.PRODUCT LIST :
SOIL EQUIPMENT ( Lab. Uji Mekanika Tanah/ Mektan) :
- HAND BOR, SO-110A
- STANDARD PENETRATION TEST ( SO-130A) , Astm D-1586/ Aashto T-206
- SAMPLE EXTRUDER ( SO-140)
- SAMPLE EXTRUDER Electric ( SO-145)
- DYNAMIC CONE PENETROMETER/ DCP ( SO-150)
- TUBE DENSITY SAMPLER, Astm D-2573 ( SO-160)
- CORPS OF ENGINEER SOIL SURFACE SAMPLER Astm D-2937, ( SO-170)
- DYNAMIC CONE PENETROMETER/ DCP ( SO-150LR)
- DUTCH CONE PENETROMETER/ Sondir 2.5 Ton ( SO-200) Astm D-3441
- DUTCH CONE PENETROMETER/ Sondir 5 Ton ( SO-210) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton ( SO-200HD) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton ( SO-210HD) , Astm D-3441
- HYDRAULIC CONE PENETROMETER/ Sondir Hydraulic 10 Ton ( SO-700HD) , Astm D-3441
- PLATE BEARING TEST SET ( SO-250) Astm D-1194/ Aashto T-235
- FIELD CBR TEST SET ( SO-260) Astm D-4429
- PROVING RING PENETROMETER ( SO-270)
- TVA PENETROMETER ( SO-280)
- ATTERBERGH LIMIT ( SO-310, SO-315, SO-320)
- LIQUID LIMIT TEST SET ( SO-310) Astm D-4318/ Aashto T-89
- LIQUID LIMIT DEVICE Hand Operated ( SO-311A) , Astm D-4318/ Aashto T-89.
- LIQUID LIMIT DEVICE ELECTRIC ( SO-311B) , Astm D-4318/ Aashto T-89
- PLASTIC LIMIT TEST SET ( SO-315) , Astm D-4318/ Aashto T-90
- SHRINKAGE LIMIT TEST SET ( SO-320) , Astm D-427/ Aashto T-92
- HYDROMETER ANALYSIS TEST SET ( SO-330A) , Astm D-422/ Aashto T-88
- MECHANICAL END OVER END SHAKER ( SO-338) , BS-1377
- VACUUM STAND With 6 Flask Capacity ( SO-339A)
- SPECIFIC GRAVITY Heating Method ( SO-340)
- SPECIFIC GRAVITY Vacuum Method ( SO-340A) , Astm D-854/ Aashto T-100
- SPECIFIC GRAVITY Vacuum Method ( SO-340B) , Astm D-854/ Aashto T-100
- COMPACTION TEST SET ( SO-350) , Astm D-698/ D-1557/ T-99/ T-180
- LABORATORY CBR TEST SET Electric ( SO-360A) , Astm D-1883/ Aashto T-193
- LABORATORY CBR TEST SET, Astm D-1883/ Aashto T-193
- COMBINATION PERMEAMETER ( SO-370) , Astm D-2434/ AASHTO T-215
- COMPACTION PERMEAMETER TEST SET ( SO-390A) , 1/ 30 cu.ft
- COMPACTION PERMEAMETER TEST SET ( SO-395A) , 1/ 13.33 cu.ft
- SAND CONE TEST SET ( SO-400) , Astm D-1556/ Aashto T-191
- SPEEDY MOISTURE TESTER ( SO-430) , Aashto T-217
- MOISTURE CONTENT TEST SET ( SO-450)
- SPEEDY MOISTURE TESTER ( SO-430D) , Aashto T-217
- UNCONFINED COMPRESSION MACHINE ( SO-500) , Astm D-2166/ Aashto T-208
- UNCONFINED COMPRESSION MACHINE ELECTRIC ( SO-500A) , Astm D-2166/ Aashto T-208- CONSOLIDATION TEST SET ( SO-515) , Astm D-2435/ Aashto T-216
- DIRECT SHEAR TEST SET ( SO-525) , Astm D-3080/ Aashto T-236
- ELECTRIC DIRECT SHEAR TEST SET
- TRIAXIAL TEST SET ( SO-600) CU, UU, CD test methode, Astm D-2850, Digital reading for PP value
- TRIAXIAL TEST SET ( SO-550) CU, UU, CD test methode Astm D-2850, Mercury manometer reading for PP value
AGGREGATE EQUIPMENT ( Lab. Uji Bahan/ Mektan) :
- SAMPLE SPLITER AG-100, 1/ 2 inch, 12 holes, 1/ 2 inch chute width
- SAMPLE SPLITER AG-101, 3/ 4 inch, 12 holes, 3/ 4 inch chute width
- SAMPLE SPLITER 1 inch, 12 holes, 1 inch chute width ( AG-102)
- SAMPLE SPLITER 1-1/ 2 inch, 12 holes, 1-1/ 2 inch chute width ( AG-103)
- SAMPLE SPLITER 2 inch, 12 holes, 2 inch chute width ( AG-104)
- SAMPLE SPLITER 2 1/ 2 inch, 12 holes, 2 1/ 2 inch chute width ( AG-105)
- SAMPLE SPLITER 3 " inch, 12 holes, 3 inch chute width ( AG-106)
- GILSON SAMPLE SPLITTER Varieble chute width, 1/ 2 " increment ( AG-111)
- PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 32 holes ( AG-122)
- PRECISSION SAMPLE SPLITTER chute width 1/ 4 " x 16 holes ( AG-123)
- STANDAR SIEVE, Brass Round Sieve 8 " ( 200 cm) diameter
- LENGTH GAUGE ( AG-170) , BS-812
- THICKNESS GAUGE ( AG-180) , BS-812
- STANDAR SIEVE Brass Round Sieve 12 " ( 200 cm) diameter - Gradation test & Distribution test
- SIEVE 4 " ; mesh 101.6 mm opening, 8 " dia ( AG-200A)
- SIEVE 3 1/ 2 " ; mesh 88.9 mm opening, 8 inch dia ( AG-201A)
- SIEVE 3 " ; mesh 76.2 mm opening, 8 " dia ( AG-202A)
- SIEVE 2 1/ 2 " ; mesh 62.5 mm opening, 8 inch dia ( AG-203A)
- SIEVE 2 " ; mesh 50.8 mm opening, 8 " dia ( AG-204A)
- SIEVE 1 3/ 4 " ; mesh 44.4 mm opening, 8 inch dia ( AG-205A)
- SIEVE 1 1/ 2 " ; mesh 38.1 mm opening, 8 " dia ( AG-206A)
- SIEVE 1 1/ 4 " ; mesh 31.7 mm opening, 8 inch dia ( AG-207A)
- SIEVE 1 " ; mesh 25.4 mm opening, 8 " dia ( AG-208A)
- SIEVE 7/ 8 " ; mesh 22.2 mm opening, 8 inch dia ( AG-209A)
- SIEVE 3/ 4 " ; mesh 19.0 mm opening, 8 " dia ( AG-210A)
- SIEVE 5/ 8 " ; mesh 15.8 mm opening, 8 inch dia ( AG-211A)
- SIEVE 1/ 2 " ; mesh 12.7 mm opening, 8 " dia ( AG-212A)
- SIEVE 7/ 16 " ; mesh 11.1 mm opening, 8 inch dia ( AG-213A)
- SIEVE 3/ 8 " ; mesh 9.5 mm opening, 8 " dia ( AG-214A)
- SIEVE 5/ 16 " ; mesh 7.9 mm opening, 8 inch dia ( AG-215A)
- SIEVE 1/ 4 " ; mesh 6.3 mm opening, 8 " dia ( AG-216A)
- SIEVE # 4; mesh 4.75 mm opening, 8 inch dia ( AG-218A)
- SIEVE # 8; mesh 2.36 mm opening, 8 " dia ( AG-222A)
- SIEVE # 10; mesh 2.00 mm opening, 8 inch dia ( AG-223A)
- SIEVE # 12; mesh 1.70 mm opening, 8 " dia ( AG-224A)
- SIEVE # 16; mesh 1.18 mm opening, 8 inch dia ( AG-226A)
- SIEVE # 20; mesh 0.850 mm opening, 8 " dia ( AG-228A)
- SIEVE # 30; mesh 0.600 mm opening, 8 inch dia ( AG-230A)
- SIEVE # 40; mesh 0.425 mm opening, 8 " dia ( AG-232A)
- SIEVE # 50; mesh 0.300 mm opening, 8 inch dia ( AG-234A)
- SIEVE # 60; mesh 0.250 mm opening, 8 " dia ( AG-235A)
- SIEVE # 70; mesh 0.212 mm opening, 8 inch dia ( AG-236A)
- SIEVE # 80; mesh 0.180 mm opening, 8 " dia ( AG-237A)
- SIEVE # 100; mesh 0.150 mm opening, 8 inch dia ( AG-238A)
- SIEVE # 120; mesh 0.125 mm opening, 8 " dia ( AG-240A)
- SIEVE # 140; mesh 0.106 mm opening, 8 inch dia ( AG-240A)
- SIEVE # 170; mesh 0.090 mm opening, 8 " dia ( AG-242A)
- SIEVE # 200; mesh 0.075 mm opening, 8 inch dia ( AG-242A)
- PAN & COVER; receiver with lid, 8 inch dia ( AG-250)
- STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch diameter Sieve Analysis, Gradation Test, AG 300A up to AG 350
- SIEVE SHAKER ( AG-510) , Hand Operated
- SIEVE SHAKER Electric ( AG-515)
- ELECTRIC SIEVE SHAKER With Timer ( AG-515T)
- WOODEN STANDAR SIEVE Stainless Steel Round Sieve 8 inch dia)
- WOODEN SIEVE 1/ 4 Inch up to 4 Inch ( mesh 6.3 mm up to mesh 101.6 mm opening)
- WOODEN SIEVE # 4; Mesh 4.75 mm opening
- WET WASHING SIEVE # 200, 8 " dia., 4 " depth ( AG-492)
- WET WASHING SIEVE # 200, 8 " dia., 8 " depth ( AG-493)
- SAND EQUIVALENT TEST SET ( AG-600) Astm D-2419
- SAND EQUIVALENT SHAKER ( AG-610) Astm D-2419/ Aashto T-176
- BOTTLE ROLLER BS-812/ Astm C-117 ( AG-621)
- LOS ANGELES ABRASION MACHINE, Astm C-131/ AASHTO T-96 ( AG-700)
- AGGREGATE IMPACT TEST, BS-812 ( AG-750)
- AGGREGATE CRUSHING VALUE APPARATUS, BS-812 ( AG-760)
- AGGREGATE CRUSHING VALUE APPARATUS ( AG-760A)
- UNCOMPACTED VOID CONTENT APPARATUS
- BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 ( AG-800)
- ABSORPTION OF FINE AGGREGATE TEST SET, Astm C-128/ Aashto T-84 ( AG-810A)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, Astm C-127/ AASHTO T-85 ( AG-825)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, Astm C-127/ AASHTO T-85 ( AG-825)
- ORGANIC IMPURITIES TEST SET, Astm C-40/ AASHTO T-21 ( AG-910)
- SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 ( AG-920)
- GEOLISTRIK / RESISTIVITY METER ( Mebatek22S)
CONCRETE TESTING EQUIPMENT ( Lab. Beton/ Uji Bahan struktur) :
- COMPRESSION MACHINE 1500 kN ( CO-321.3) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 2000 kN ( CO-321.4) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 3000 kN ( CO-321.5) , Press Beton Hydraulic Hand Pump Astm C-39
- COMPRESSION MACHINE 1500 kN ( CO-325.3SA) , Test Beton Electric Hydraulic Pump ASTM C-39
- COMPRESSION MACHINE 2000 kN ( CO-325.4SA) , Test Beton Electric Hydraulic Pump Astm C-39
- COMPRESSION MACHINE 3000 kN ( CO-325.5SA) , Test Beton Electric Hydraulic Pump Astm C-39
- HYDRAULIC CONCRETE BEAM TESTING MACHINE ( CO-330) , Astm C-78
- MECHANICAL CONCRETE BEAM TESTING MACHINE ( CO-351) , Astm C-78
- CONCRETE CYLINDER MOLD ( CO-300) , Silinder Beton 10 cm dia x 20 cm height
- CONCRETE CYLINDER MOLD ( CO-301) , Silinder Beton 15 cm dia x 30 cm height
- CONCRETE CUBE MOLD ( CO-311) , Kubus Beton 10 x 10 x 10 cm
- CONCRETE CUBE MOLD ( CO-312) , Kubus Beton 15 x 15 x 15 cm
- CONCRETE BEAM MOLD ( CO-317A) , 15x15x60 cm Uji lentur beton
- CONCRETE BEAM MOLD ( CO-319A) , 20x20x80 cm Uji lentur beton
- CONCRETE CRUSHING MACHINE 1500 kN ( CO-325.3SA)
- CONCRETE CRUSHING MACHINE 2000 kN ( CO-325.4SA)
- HAMMER TEST ORIGINAL
- HAMMER TEST DIGITAL
- COMPACTING FACTOR APPARATUS ( CO-355) , BS-1881
- SLUMP TEST SET ( CO-370) , Astm C-143/ Aashto T-119
- CONCRETE COMPRESSION MACHINE 1500 kN ( CO-325.3DA) , Test Beton Electric Hydraulic Pump ASTM C-39
- CONCRETE COMPRESSION MACHINE 2000 kN ( CO-325.4DA) , Test Beton Electric Hydraulic Pump Astm C-39
- CONCRETE COMPRESSION MACHINE 3000 kN ( CO-325.5DA) , Test Beton Electric Hydraulic Pump Astm C-39
- VEBE TIME ( CO-380) , BS-1881
- AIR CONTENT OF FRESH MIXED CONCRETE ( CO-400) , Astm C-231/ Aashto T-152
- VIBRATING TABLE ( CO-410)
- VERTICAL CYLINDER CAPPING SET ( CO-470) , Astm C-617
- MODULUS OF ELASTICITY IN CONCRETE TEST SET ( CO-500)
- SPLIT TENSILE TEST CO-525, BS-1881
- CONCRETE TEST HAMMER Astm C-805 Proceq/ Original Schmidt ® , Matest, Tecnotest, Elcometer.
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE TEST HAMMER Type N ( CO-550.1S)
- CONCRETE TEST HAMMER Type L ( CO-550.2S)
- CONCRETE TEST HAMMER Type NR ( CO-550.3S)
- CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.3S)
- DIGITAL CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.5S)
- SILVER SCHMIDT Type Pcn, UN, BN/ Proceq Concrete Test Hammer
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE CRACK DETECTION ( CO-325UI) â Ultrasonic Instrumentâ Concrete determination for Cavities, crack, defects due to fire and frost
- REBARS LOCATOR ( CO-570S)
- PROFOSCOPE Rebars Detectors, Rebar detection, Measurement of Concrete cover
- PULL OFF TESTER 6 or 16 kN with digital manometer ( CO-550.8S)
- PULL-OFF TESTER 6 or 16 kN with Electronic Display Device
- BUILDING MOISTURE METERS ( CO-5360BLD)
- CONCRETE/ ASPHALT CUTTER ( CO-400DCC)
- CONCRETE VIBRATOR ( CO-20EY)
- LABORATORY CONCRETE MIXER ( CO-610)
- AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE ( CE-100) , Astm C-204/ Aashto T-153
- SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST ( CE-110) , Astm C-188/ Aashto T-133
- TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE ( CE-120) , Astm C-187/ C-191/ T-129/ T-131
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR ( CE-160) , Astm C-109/ Aashto T-106
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, ASTM C-109/ AASHTO T-106 ( CE-160A)
- COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-170)
- COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, ASTM C-109 ( CE-175)
- DIGITAL COMPRESSION MACHINE 2000 kN ( CO-325.4DSA)
- DIGITAL COMPRESSION MACHINE 3000 kN ( CO-325.5DSA)
ASPHALT EQUIPMENT ( Lab. Uji Aspal/ Jalan Raya & Transportasi) :
- SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS ( BI-100) , Astm D-70/ Aashto T-228
- DISTILATION OF CUTBACK ASPHALTS ( BI-110) , Astm D-402/ Aashto T-78
- WATER CONTENT IN PETROLEUM PRODUCTS ( BI-120) , Astm D-95/ Aashto T-55
- SAYBOLT VISCOSIMETER ( BI-150A) , Astm D-402/ Aashto T-78
- ASTM THERMOMETER 17 C, 19 to 27 deg.C ( GE-644.1)
- ASTM THERMOMETER 18 C, 34 to 42 deg.C ( GE-644.2)
- ASTM THERMOMETER 19 C, 49 to 57 deg.C ( GE-644.3)
- ASTM THERMOMETER 20 C, 57 to 65 deg.C ( GE-644.4)
- ASTM THERMOMETER 21 C, 79 to 87 deg.C ( GE-644.5)
- ASTM THERMOMETER 22 C, 95 to 103 deg.C ( GE-644.6)
- DIGITAL ASPHALT THERMOMETER ( GE-914TM)
- INFRARED THERMOMETERGE ( 380ST)
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200) , Astm D-92/ Aashto T-48
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200 A) , Astm D-92/ Aashto T-48
- SOFTENING POINT TEST SET ( BI-210) , Astm D-36/ Aashto T-53
- LOSS ON HEATING/ THIN-FILM TEST ( BI-220) , Astm D-6/ D-1754, Aashto T-47/ T-179
- LABORATORY PENETRATION TEST SET ( BI-230) , Astm D-5/ Aashto T-49
- LABORATORY PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- AUTOMATIC BITUMINOUS COMPACTOR ( BI-325AAC) , Astm D-5581, BS 598-107, EN 12697-30
- DUCTILITY OF BITUMINOUS MATERIALS TEST SET ( BI-250) , Astm D-113/ Aashto T-51
- PARTICLE CHARGE METER ( BI-260)
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300) , Astm D-2172/ Aashto T-164
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300A) , Astm D-2172/ Aashto T-164
- REFLUX EXTRACTOR TEST SET ( BI-310) , ASTM D-2172/ AASHTO T-164
- BITUMINOUS PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- PORTABLE CORE DRILLING MACHINE ( ZIZ-CF102)
- MARSHALL TEST SET ( BI-320) , Astm D-1559/ Aashto T-245
- AUTOMATIC ASPHALT COMPACTOR ( BI-325AAC) , Astm D-5581, BS 598-107, EN 12697-30
- PERCENTAGE REFUSAL DENSITY BI-325PRD, BS 598-104; EN 12697-32
- CORE DRILLING TEST SET ( BI-400)
- DIAMOND BIT ( BI-406)
- DIAMOND CORE BIT ( BI-406.4H)
- CORE DRILLING TEST SET With Water Pump ( BI-400L)
- BENKLEMAN BEAM ( BI-450)
- MOT STRAIGHT EDGE ( BI-470)
- ASPHALT RECOVERY APPARATUS ( BI-480)
- ASPHALT/ CONCRETE CUTTER ( CO-400DCC)
MISCELLANEOUS :
- UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN Compression, Tensile, Bending and Shearing test
- TENSILE TESTING MACHINE, test of PVC materials ( MI-100)
- UNIVERSAL TESTING MACHINE 2000 kN, 1000 kN
- DIBBLE ( TUGAL) MI-120
- RAIN GAUGE ( MI-130)
- MORTAR MIXER, 5 â 10 Kg Capacity
GENERAL EQUIPMENT ( Alat Uji Penunjang Laboratorium) :
- PROVING RING 100 kg capacity ( GE-101.1) Calibration & certified
- PROVING RING 250 lbs capacity ( GE-101.2) Calibration & certified
- PROVING RING 500 lbs capacity ( GE-101.3) Calibration & certified
- PROVING RING 1000 lbs capacity ( GE-101.4) Calibration & certified
- PROVING RING 2.000 lbs capacity ( GE-101.5) Calibration & certified
- PROVING RING 6000 lbs capacity ( GE-101.6) + Kalibrasi
- PROVING RING 10.000 lbs capacity ( GE-101) + Kalibrasi
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 0.2 in. x 0.0001 in ( GE-130)
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 1.0 in x 0.01 in GE-131
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 10mm x 0.01mm GE-135
- Dial Gauge- Indicator ( Mitutoyo, Teclock) , 20mm x 0.01mm GE-136
- Dial Gauge Indicator ( Mitutoyo, Teclock) , 30mm x 0.01mm GE-137
- Dial Indicator ( Mitutoyo, Teclock) , 50 mm x 0.01 mm ( GE-138)
- Magnetic Dial Holder ( GE-140)
- DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity ( GE-161PC)
- CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity ( GE-150)
- Timbangan Ohaus - TRIPLE BEAM BALANCE ( Ohaus, ADAM)
- TRIPLE BEAM BALANCE 2610 gr x 0.1 sensitivity ( GE-152SW)
- Timbangan 2610 gr x 0.1 sensitivity ( GE-152LK)
- DIAL O-GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity ( GE-153)
- HEAVY DUTY SOLUTION BALANCE, 20 kg x 1 sensitivity ( GE-157DO)
- PLATFORM SCALE 50 kg x 10 gr sensitivity ( GE-159)
- HEAVY DUTY SOLUTION BALANCE ( GE-157LK) , 20 kg x 1 sens
- DIGITAL BALANCE ( OHAUS / AND) , 310 gr cap x 0.001 gr sensitivity GE-160
- DIGITAL BALANCE, 6100 gr x 0.1 gr sensitivity ( GE-161)
- OVEN ( Memmert) 14 litre, drying type ( GE-171)
- OVEN ( Memmert) 32 litre, drying type ( GE-172)
- OVEN ( Memmert) 39 litre, drying type ( GE-173)
- OVEN ( Memmert) 53 litre, drying type ( GE-174)
- OVEN ( Memmert) 108 litre, drying type ( GE-175)
- LABORATORY OVEN ( Memmert) 256 litre, drying type ( GE-176)
- LABORATORY OVEN ( Memmert) 416 litre, drying type ( GE-177)
- LABORATORY OVEN ( Memmert) 749 litre, drying type ( GE-178)
- HOT PLATE ( GE-191) , Single burner plate
- HOT PLATE ( GE-192) , Double burner plate
- GLASS PLATE ( GE-396) , 10 mm thick, 30 x 30 cm
- WATER BATH, COOLING SYSTEM
- BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
- GLASS CLAMP, ASBESTOS, WIRE GAUZE
- SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
- RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
- THIN BOX, ROUND PAN; SAMPLE CAN
- MIXING BOWL, 10cm - 20cm - 24cm diameter.
- GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
- ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
- SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
- FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
- DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
- DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter.
- FUNNEL, plastic or glass, wide or narrow mouth.
- BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
- EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia â 350 ml capacity; 17 cm dia., 500 ml capacity.
- MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
- WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
- PIPETTE, 5 ml - 10 ml capacity
- CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
- THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C. 0-360 deg.C.
- POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
- DIAL THERMOMETER, range 0 - 100; 0-200; 0-300 deg.C.
- ASTM THERMOMETER 12C, 20 to 102 deg.C/ Specific Gravity ( GE-641)
- ASTM THERMOMETER 63 C, 8 to 32 deg.C ( GE-642)
- ASTM THERMOMETER 13 C, 155 to 170 deg.C/ Loss on Heating ( GE-643)
- ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C/ Softening Point ( GE-646.1)
- ASTM THERMOMETER 16 C, 30 to 200 deg.C/ Softening Point ( GE-646.2)
- ASTM THERMOMETER 11 C, 6 to 400 deg.C/ Open Flash ( GE-648)
- ASTM THERMOMETER 7 C, 2 to 300 deg.C/ Distilation ( GE-649.1)
- ASTM THERMOMETER 8 C, 2 to 400 deg.C/ Distilation ( GE-649.2)
- DRYING OVEN 14 litre, drying type ( GE-171)
- DRYING OVEN 32 litre, drying type ( GE-172)
- DRYING OVEN 39 litre, drying type ( GE-173)
- DRYING OVEN 53 litre, drying type ( GE-174)
- DRYING OVEN 108 litre, drying type ( GE-175)
- DRYING OVEN 256 litre, drying type ( GE-176)
- DRYING OVEN 416 litre, drying type ( GE-177)
- DRYING OVEN 749 litre, drying type ( GE-178)
- MANOMETER 25 kg/ cm2 capacity, 6 " diameter ( GE-670)
- MANOMETER 60 kg/ cm2 capacity, 6 " diameter ( GE-671)
- MANOMETER 150 kg/ cm2 capacity, 6 " diameter ( GE-672)
- MANOMETER, 250 kg/ cm2 capacity, 6 " diameter ( GE-673)
- MANOMETER 300 kg/ cm2 capacity, 6 " diameter ( GE-674)
- MANOMETER 500 kg/ cm2 capacity, 6 " diameter ( GE-675)
- MANOMETER 700 kg/ cm2 capacity, 6 " diameter ( GE-676)
- MANOMETER 1000 kg/ cm2 capacity, 6 " diameter ( GE-677)
- VACUUM MANOMETER, 4 " dia. 0-76 cm HG ( GE-679)
- VACUUM PUMP, Rotary type, 1/ 2 HP ( GE-680)
- HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 Ton capacity.
- HYDRAULIC HAND PUMP, 10.000 psi, single action ( GE-690)
- HYDRAULIC HAND PUMP, 10.000 psi, double acting ( GE-691)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, single action ( GE-692)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting ( GE-695)
- HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi ( GE-697)
- STOP WATCH GE-700, 60 sec sweep x 30 min
- STOP WATCH GE-701, 30 sec sweep x 30 min
- VERNIER CALIPER 6 inch ( 150 mm) range measuring ( GE-710)
- VERNIER CALIPER 8 inch ( 200 mm) range measuring ( GE-711)
- VERNIER CALIPER1 10 inch ( 250 mm) range measuring ( GE-712)
- VERNIER CALIPER 12 inch ( 300 mm) range measuring ( GE-713)
- Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
- Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
- Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
- Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener' s Type Trowel, Chissel,
- Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.
MINING, COAL & PREPARATION EQUIPMENT ( Alat Lab Batubara, Nikel dan Pertambangan Umum)
- JAW CRUSHER 5 " x 8 " ( ME-100)
- JAW CRUSHER 2 3/ 8 " x 8 " ( ME-130)
- JAW CRUSHER 6.5 " x 8 " ( ME-110)
- LAB TYPE JAW CRUSHER ( ME-140)
- SINGLE ROLL CRUSHER 10 " ( ME-150)
- DOUBLE ROOL CRUSHER 10 " x 6 " ( ME-160)
- DOUBLE ROOL CRUSHER 20 " ( ME-165)
- LABORATORY MIXER CRUSHER ( ME-172)
- ROTARY SAMPLE DEVIDER 15 KG ( ME-170S1)
- ROTARY SAMPLE DEVIDER 30 KG ( ME-170S2)
- ROTARY SAMPLE DEVIDER 50 KG ( ME-170S3)
- ROTARY SAMPLE DEVIDER 120 KG ( ME-170S4)
- MIXER V ( ME-173)
- RO-TAP SIEVE SHAKER 8 " ( ME-180)
- RO-TAP SIEVE SHAKER 12 " ( ME-185)
- SHAKING TABLE / Table Consentrator / Meja Goyang ( ME-190)
- SAMPLE SPLITTER, Variable chute ( alumunium) width 1/ 2 inch ( 1/ 2â , 1â , 1 Â ½ â , 2â , etc)
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
- SAMPLE DEVIDER, Stainlles steel, chute width 1 " inch, 12 holes, with scoop & pan
- DISC PULVERIZER ( ME-210)
- BALL MILL ( ME-230BM)
- HAMMER MILL ( ME-240)
- GRINDING MILL ( ME-245)
- RAYMOND MILL ( ME-250)
- HARD GROVE GRINDABILITY ( ME-280)
- BIG DRYING SHED 180 x 120 x 550 cm ( ME-290)
- HOT PLATE ( ME-330)
- DRYING OVEN 120 X 110 X 220 cm ( ME-350)
- ROTARY OVEN ( Oven Rotary)
- CUTTING MESIN ( ME-400)
- THIN SECTION GRINDER
- LAB. PULVERIZER Pneumatic ( ME-200P)
- LAB. PULVERIZER Manual ( ME-200A)
- PORTABLE PULVERIZER ( ME-172)
- PELLET PRESS MACHINE ( ME-25PP)
- GRINDING MILL ( ME-245)
- V-MIXER ( ME-175)
- GRINDING HEAD SET C 1000
- GRINDING HEAD SET C 2000
- BIG DRYING SHED
- DUST COLLECTOR
- HOT PLATE
- OVEN ROTARY
Part & Accessories :
- JAW FACE 5 " X 8 "
- JAW FACE 5 " X 8 " ( Manganese)
- JAW FACE TYPE LAB
- GRINDING MILL C 500
- GRINDING MILL C 1000
- GRINDING MILL C 2000
- JIS SCOOP
- Saya kenal dengan perusahaan ini dan ingin memberikan tinjauan.
- Kenalkan ke teman Anda
